WiFi Infrastructure gives organisations the possibility of building quality, uniform coverage over the area of operation. This can give radio coverage over difficult terrain, with antenna and masts supplying additional
support to meet the needs of the geography. This flexibility provides coverage for organisations, such as utility companies with vehicles out on call, but can additionally provide services for local emergency services,
domestic properties, schools, local government and more besides.
Access Points - Outdoor/Indoor
Range Introduction
Altai C1 series WiFi CPE/AP
Altai C2s Dual-Band 2×2 802.11ac WiFi AP/Bridge
We’ll put our complete understanding of the capabilities of this technology to work for you. From servicing and spares right through to complete new systems we’ll be acting to get the very
best solution for your business.
The Altai C1 series WiFi CPE/AP is designed as an essential component in the Altai Super WiFi system to extend outdoor Wi-Fi coverage into indoor areas for broadband connectivity or use as
an AP for pico coverage. The Altai C1n employs patented smart signal processing algorithms and antenna design to increase Wi-Fi signal strength (transmit and receive) by as much as 16
dB in areas covered by an A8n Super WiFi Base Station or A2 WiFi Access Point.
Highlights: - Patented signal processing for improved radio performance in
LOS and NLOS conditions - Supports multiple isolated end-users through per client/VAP bandwidth control - Per-end-user remote web-based management and client association status - Optional high-performance external omni or sector antennas – optimizing performance when operating in conjunction with Altai A8n series antennas - Operates both as a CPE and as
a small WiFi access point for local coverage; it is also perfect for use as low cost point-to-point bridge - Integrated 8-level LED alignment mechanism for fast, simple and best performing
installation - Weatherproof case (IP55 compliant) for enabling out-of-the-box outdoor installation - The C1xn operates in the 2.4GHz band while the C1xan operates in the 5GHz
band
The carrier-grade Altai C2s Dual-Band 2×2 802.11ac WiFi AP/Bridge is specially designed for service providers that need carrier grade performance such as outstanding coverage and high capacity
while remaining highly economical solution. Combining several technology breakthroughs such as superior RF and filter design, smart band steering and load balancing technologies, the
Altai C2 series is an ideal solution for hotspot and smart city connectivity.
Highlights: - 2.4 and 5 GHz dual-band dual concurrent access - 2×2 MIMO
for both 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac) radios - Up to 50% larger coverage minimizes the number of APs required for any WiFi network - Combined with either A8-Ein
(ac) or A3-Ei, the solution delivers WiFi coverage up to 3 km - Standalone, controller-based, or cloud-based management with AltaiCare - IP-55 rated carrier grade 802.11a/b/g/n/ac
AP for different applications - Light weight with built-in lightning protection - Easy installation & web-based or cloud-based management - Multi-operating modes allowed:
AP, bridge mode or CPE - 802.3at compliant PoE
A8 Series - WiFi solution with integrated antenna array
A3 Series - Dual-band 3×3 WiFi Access Point
A2 Series - Access Point/Bridge
B Series - Bridge solution
Our experience at fact-finding with our customers and identifying their needs goes hand in hand with our engineering skills to maintain and build the best communications systems.
Altai’s super WiFi A8-Ein(ac) base station is an advanced 100º sectorial 802.11 a/b/g/n/ac WiFi solution. With its integrated 8-element MIMO antenna array, the A8-Ein (ac) series is designed
for fast and simple installation, requiring a single-pole mount to deliver instant long-range coverage and the best NLOS performance. Operating concurrently in both 2.4GHz and 5GHz
bands, the Super WiFi A8Ein (ac) series base station can provide access connectivity in both bands as well as long-range (up to 30 km) backhauling in the 5GHz band, through a dual-polarization
flat-panel antenna.
Highlights: - Provides up to 5 times the range and 10 times the area of coverage as compared to standard access points - Up to
90% fewer sites for the same coverage area - 50 cm co-location with 3G/4G antennas - Up to 300 Mbps (access) plus 867 Mbps (access/backhaul for ac model) /300 Mbps (access/backhaul
for n model) capacity per base station - Fast and simple installation using a single-pole mount for radios and antennas - Extended reach with up to a 30 km backhauling range - Altai’s AirFi technology for higher capacity and efficiency per WiFi channels
The Altai A3 Dual-band 3×3 WiFi Access Point series is designed to be used in Altai Super WiFi systems to provide high capacity 2.4 GHz and 5 GHz dual-band dual-concurrent access coverage
for both outdoor and indoor areas, and to increase system capacity, extend coverage, fill-in areas of low or blocked signals caused by obstructions. It is capable of providing the
highest possible data throughput and capacity that the 802.11ac 3×3 3-stream MIMO standards can offer.)
Highlights: - High capacity 1.3 Gbps in 5 GHz
and 450 Mbps in 2.4 GHz - Built-in 2.4 and 5 GHz 3×3 MIMO spatial polarized antennas - 3×3 MIMO in 3 streams for both 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac) radios - IP-67 rated carrier grade 802.11a/b/g/n/ac AP for outdoor applications - Fill-in coverage area in challenging RF environment - AltaiCare cloud-based zero configuration and
secured AP management - Multi-operating modes allowed: AP, bridge, repeater mode or CPE - 802.3at and 802.2af compliant PoE
The Altai A2 WiFi Access Point/Bridge series is designed to be used in Altai Super WiFi systems to increase system capacity, extend coverage, fill-in areas of low or blocked signals caused
by obstructions and bridge wirelessly to remote site. It is capable of providing the highest possible data throughput and capacity that the 802.11n standards can offer.
Highlights: - 2 x 2 MIMO for both 2.4GHz (802.11b/g/n) and 5 GHz (802.11a/n) radios delivering up to 300 Mbps of WiFi access capacity and 300 Mbps of backhaul
capacity - 2 external 2.4GHz antenna ports for 90° to 360° WiFi coverage - PTP and PTMP bridging with the integrated dual slant 5GHz panel antenna - Gigabit Ethernet or
2 x 2 802.11a/n wireless backhaul - Multiple operating modes allowed: access point, bridge, repeater or CPE - IP-67 rated carrier grade 802.11b/g/n AP for both outdoor and
indoor applications - Lightweight with built-in lightning protection - 802.3at compliant PoE
The Altai B5 PTP is a powerful bridge solution with an integrated 5GHz radio and antenna, designed for high throughput and long range PTP bridging. The Altai B5 PTP series consist of
5 models with different combinations of transmit power, antenna gain and configuration, for different range and throughput requirements.
Highlights: -
Configurable 4.9 to 6.0 GHz frequency band - Possible operational distances in excess of 80 km - High capacity – up to 280 Mbps throughput - 2×2 MIMO innovative technology - “Pay as you grow” software upgradeable capacity feature - 5/10/20/40 MHz channel widths - Unique plug & play out-of-box ultra-long LOS and NLOS backhaul solution - Gigabit
Ethernet port and flexible uplink/downlink reallocation - Advanced Quality-of-Service support, reliable and robust design
From our first consultations with new customers right through to the on call service provided in the long term we are able to service, supply and fit a full range of systems and networks
to meet your needs.
The Altai A2c Indoor Dual-band 2×2 AP is specifically designed to deliver unparalleled Wi-Fi experience and highly reliable and consistent services to mobile users at the market’s most
affordable price point. The Altai A2c offers a low cost solution that delivers best-in-class dual-band Wi-Fi performance and reliability for schools, hotels, and retail stores. Altai’s
smart band steering and load balancing technologies allow Altai A2c to effectively utilize both 2.4GHz and 5GHz spectrums for supporting a large number of mobile users running bandwidth
hungry applications. Altai A2c supports a wide range of applications such as social login, hotspot authentication, guest access, firewall, and wireless intrusion detection that allow
either enterprises to set up their private networks easily, or WISPs to quickly deploy and monetize hotspot services.
Highlights: - 2.4GHz and 5GHz dual-band
concurrent access - 2×2 MIMO for both 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac) radios - Up to 50% larger coverage minimizes the number of APs required for any Wi-Fi network - Standalone, controller-based, or cloud-based management with AltaiCare - Sleek, low profile design allows it to blend into any surrounding environment - 802.3at compliant
PoE
The Altai A3c Dual-band Access Point is designed to be used in Altai Super WiFi systems to provide the highest speed 2.4 and 5 GHz dual-band dual-concurrent access coverage for indoor
areas. The A3c has both a 2.4 GHz (3×3:3 802.11b/g/n) radio and a high capacity 5 GHz (3×3:3 802.11a/n/ac) radio which can be operated at the same time for 2.4 and 5 GHz dual-band
dual-concurrent access coverage. The dual-band operation not only provides the highest capacity up to 1.75 Gbps but also performs better in the less interfered 5 GHz frequency band.
The ceiling-mounted design of A3c can be installed exactly on the ceiling where the capacity is required.
Highlights: - High capacity 1.3 Gbps in 5 GHz
and 450 Mbps in 2.4 GHz - Built-in 2.4 and 5 GHz 3×3 MIMO spatial polarized antennas - Ceiling-mounted omni coverage - 3×3 MIMO in 3 streams for both 2.4GHz (802.11b/g/n)
and 5GHz (802.11a/n/ac) radios - Carrier grade 802.11a/b/g/n/ac AP for indoor applications - AltaiCare cloud-based zero configuration and secured AP management - Multi-operating
modes allowed: AP, bridge, repeater mode or CPE - 802.3at and 802.2af compliant PoE
